There is nothing worse than a leaky roof. So when you notice that theres something just not right with the tiles on your roof, its best to get on that right away! Thankfully, fixing a loose or broken roof tile can easily be a DIY project. Heres what you need to know:

The tools

Before you even begin, its important to make sure you have all the necessary tools to get the job done. Luckily, most of these items you likely already have.

Typical tools required to fix a rooftop tile include a ladder, two pry bars, a hammer, pliers, and of course roofing nails. Its also recommended that you wear safety glasses and work gloves. These can prevent unnecessary injury to your eyes or hands. Knee pads can also be worn.

Assess the damage

Next, youll want to assess the damage. After all, its hard to know just how wide the problem is until you can get a close visual on the damage.

Locate leftover tiles

Usually, a contractor leaves behind any leftover tiles once they have completed the job. This is of great benefit for times like theseit not only saves you time, but also money. If it turns out you do not have any extra tiles lying around, youll have to pay a visit to your local hardware store to purchase a package.

The swap

Now that you have everything you require to complete your project, you can get started.

To fix the tile, youll first have to remove the broken one. In doing so, you will also need to lift the tile to its left. This is where the two pry bars come in handy. The first will be used to help pry the tiles from the roof, while the second will work to keep the tile on the left off the roof.

Next you need to make sure youve successfully removed all the broken parts of the tile. This is where the hammer comes in. If any pieces appear to not want to budge, a gentle smack of the hammer will help to break up those stubborn bits. This is also when you want to remove any loose nails from the area.

The final step is to place the new tile into position. Make sure to nail it in carefully and in alignment with the others. Then, you can remove the second pry bar from the left tile and ensure it is secure in its original place.

Now youre all done! Make sure to collect everything and make your way back down the ladder. Its also important that you follow your local disposal regulations for the nails and broken pieces of tile.

Other considerations

There are a few other considerations to keep in mind. If you do need to purchase new tiles, you may be out of luck. Quite often manufacturers change the color of the tiles, meaning you might not be able to find the exact match to the ones youre already using. This is yet another reason why its always good to have a few extra tiles on hand.

Its also important to make sure the tiles youre using are standard thickness, weight and durability. There are thinner, lightweight tiles on the market, which are more susceptible to breakingmeaning youll be at this repair job more often.

Remember, its always important to be safe. While this could easily be a one-person job, it might be wise to ensure someone is at home and available to assist in case of any unforeseen problems. Otherwise, head on up!

Commercial Roofing Clearwater